Empty

Total: $0.00

Quick Start

  1. Install PSoC Creator IDE on your PC. This is a free download from Cypress Semiconductor.
  2. Attach the Powerfulboard to your PC using a USB cable plugged into the USB connector next to the FX2 chip. This is the one on the bottom of the board. It's mounted normally while the PSoC chip on the top is mounted on the diagonal.
  3. Program the PSoC chip with firmware using PSoC Creator.
  4. If your project requires communication between host application software and the PSoC then select or write your own host software and connect the other USB connector to your PC, Linux or other host.

For much more detailed help see the other menu choices.